Celestron NexStar IO2SLT Guía De Instalación Rápida página 7

9
Use the directional arrow keys on the hand control
to slew (move) the telescope towards any bright
celestial object in the sky. Center the object in the
finderscope and press ENTER.
1 2
For the second alignment object, choose a bright star
or planet as far away from the first alignment object
as possible. Once again, use the directional arrow
buttons to center the object in the finderscope and
press ENTER. Then, center the object in the eyepiece
and press ALIGN.
1 5
Press OBJECT INFO to read information about the
object displayed. Press the DOWN scroll button to
display the next object. Press ENTER to slew (move)
to the displayed object.
1 0
If the finderscope has been properly aligned, the
alignment star should now be visible in the field of
view of the eyepiece.
1 3
Repeat the process for the third alignment star. When
the telescope has been aligned to the final star, the
display will read "Match Confirmed". Press BACK to
view the names of the three bright objects you aligned
to, or press ENTER to accept these three objects for
alignment.
1 1
The hand control will prompt you to center the bright
alignment star in the center of the eyepiece. Once
centered, press ALIGN. This will accept the star as
your first alignment position.
1 4
Now that your telescope is properly aligned, you
are ready to find your first object. Press the SKY
TOUR button on the hand control. The hand control
will display a list of all the best celestial objects
currently visible.
ENGLISH 7
|