Garden Wood Furniture 961KFSI Instrucciones Para Armar

Banca mecedora

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Model #
961KFSI
SIENNA FINISH
Somerset Glider
44"
Assembly Instructions
Your piece of GardenWood furniture has been
finished at the factory with a tinted, penetrating oil that
contains both UV and anti-fungal inhibitors. For best
results, especially in extreme climates, another coat
of protective oil is recommended before using for the
first time. A surface coating is vital for the protection
of your furniture. Treatment should be applied at least
once or twice a year.
For normal household use only.
recommended for commercial use.
Do not climb or stand on this piece of
furniture.
Not intended for use by children without adult
supervision
Use caution when moving bench due to swinging
legs.
Presented by Whittier Wood Products
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter/number, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and
Maintaining the Beauty of GardenWood Furniture
completely before beginning.
Inspect your furniture periodically for any loose
glue joints or screws, or any other problem which
may be affecting the stability of your furniture.
Tighten or repair as needed
Production Code:
We will replace any
Rev. 5/05

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Garden Wood Furniture 961KFSI

  • Página 1 Model # 961KFSI SIENNA FINISH Somerset Glider 44" Service Policy: We will replace any parts which are defective, missing or damaged during assembly. Please contact Assembly Instructions Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts.
  • Página 2 961KFSI Somerset Glider 44" – Parts List BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list. 3 – Back – Qty. 1 1 – Left Leg Assembly – 2 – Right Leg Assembly Qty.
  • Página 3: Tools Required

    961KFSI Somerset Glider 44" ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Screwdriver, Adjustable Wrench, Mallet or Padded Hammer, Outdoor Wood Glue. FIG. 1 1) Glue three 10x40mm Wood Dowels (C) into the upper hole in each pair of holes in the Left and Right Leg Assemblies (1&2).
  • Página 4 Insert a 6.5x50mm Hex Bolt (E) through a Washer (F), the hole in the left front glider leg, another washer and the Rocker Arm. Attach Hex Nut (G) and tighten. Repeat for the other rocker arms. 961KFSI – Page 4...
  • Página 5: Acabado Sienna

    Modelo # 961KFSI ACABADO SIENNA Banca Mecedora Normas para obtener servicio: Reemplaza- remos las piezas que tengan defectos, falten o se Somerset de 44" dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Instrucciones para Armar Wood Products directamente (por teléfono, fax,...
  • Página 6: Lista De Piezas

    Inserte dos Tornillos Phillips Apriete con una Tuerca Hex (G). Repita el proce- (B) en los orificios que vienen taladrados en cada dimiento con los otros balancines. soporte exterior del asiento y apriete en ambos 961KFSI SP – Page 2...
  • Página 7 No. de modèle 961KFSI FINIR SIENNA Balancelle Somerset Politique de service : Nous remplacerons toutes les pièces défectueuses, manquantes ou de 111,76 cm (44 po) endommagées pendant le montage. Veuillez con- tacter directement le service clientèle de Whittier Instructions de Montage Wood Products (par téléphone, fax, courrier ou...
  • Página 8: Nomenclature Des Pièces

    Fixez un écrou hexa- (B) dans les trous préforés ménagés dans chaque gonal (G), puis serrez. Répétez la procédure pour renfort externe du siège, puis assujettissez celui-ci les autres bras oscillants. aux deux assemblages de pieds. Introduisez une 961KFSI FR – Page 2...
  • Página 9: General Maintenance

    Presented by Whittier Wood Products In order to maintain the appearance and life of this GardenWood Furniture™ product, please follow these instructions. Finishing Tips A surface coating is vital for the protection of your furniture. Treatment should be applied at least once or twice a year.

Tabla de contenido