Safety Instructions - Thermomatic Desidrat Plus 150 Manual De Instrucciones

Ocultar thumbs Ver también para Desidrat Plus 150:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY INSTRUCTIONS

Before you turn the equipment on, ensure that the voltage is the correct and the
equipment must be installed according to the national wiring regulations.
The equipment is recommended for indoor use only. Check the power supply voltage
and the frequency. The equipment may only be used at grounded sockets, and the
power supply voltage must be 127V – 220V ~50/60Hz (Please check the voltage at
the equipment's tag).
GENERAL
In order to operate your dehumidifier proper, do not place it close to any sources
of heat.
For maximum efficiency, ensure that all the doors and windows are closed.
The dehumidifier capacity depends on the temperature and humidity at the place.
Less humidity will be removed at lower temperatures.
Keep the filter/air intake grid always clean, to prevent unnecessary energy
consume and ensure maximum efficiency.
IMPORTANT
The equipment should always have a grounded socket. Do not connect the
equipment if the power supply is not grounded. The outlet will always need to
have an easy access when it is turned on. Read these instructions carefully and
follow then.
ATTENTION
The equipment, at any hypothesis, can be transported or maintained
at horizontal position. Failure to follow these instructions will void the
warranty.
Before turning the equipment on, pay attention to the following:
The power supply shall correspond to the supply voltage indicated on the rating
label;
Atomized and the power supply must be suitable for the current indicated on the
rating label;
The wall outlet must be fitted to the plug on the equipment cable;
The equipment shall be places at a plane and stable surface;
Do not cover the air enlace, or the outlet grid. This will cause overheating and
irreparable damages to the equipment;
Empty the water reservoir before moving the equipment;
Never place the equipment into contact with chemicals;
Never immerse the equipment or spray water directly on its surface;
Do not insert objects at the equipments openings.
Always remove the plug from the power supply before cleaning, moving or
transporting the equipment.
We do not recommend the use of extensions to connect to the electric grid. If
there is no proper socket, ask for an authorized electrician to install the socket.
Like any other electric equipment, for safety measures, be careful when kids are
around.
Repairs must be made only by authorized professionals. Otherwise, if the
20

Publicidad

Tabla de contenido
loading

Tabla de contenido