Safety And General Information; Product Description; Before Use - Omega Lift Equipment 46000 Manual De Piezas E Instrucciones De Funcionamiento

SAFETY and GENERAL INFORMATION

Save these instructions. For your safety, read, understand, and follow the information provided with and on this
equipment before using. The owner and operator of this equipment shall have an understanding of this it and of
safe operating procedures before attempting to use. The owner and operator shall be aware that the use and repair
of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in
the operator's native language before use is authorized. If any doubt exists as to the safe and proper use of this
equipment, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. Any Brake Drum
Handler that appears damaged in any way, or operates abnormally shall be removed from service immediately. If
this equipment has been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately
discontinue use until it has been checked by a factory authorized service center (contact distributor or manufacturer
for list of authorized service centers). It is recommended that an annual inspection be done by qualified personnel.
Labels and Operator's Manuals are available from manufacturer.

PRODUCT DESCRIPTION

The Omega Brake Drum Handler is specifically designed to engage, secure, and transport from an axle assembly,
an unfastened and loose brake drum/hub assembly. It is not designed to act as a puller and should be relied upon
to ONLY handle brake drum/hub assemblies which nest within the holding arms and side frames of the Brake Drum
Handler as seen in Figs 2, 3.
!
WARNING: Do not use this device for any purpose other than that for which it is expressly intended.
SPECIFICATIONS
Model Min. Bed Height
46000 10-5/8"
Holding Arm
Bed
Drum Handler
Frame
Figure 1 - Model 46000 Nomenclature
Max. Bed Height
15"
Hook Bracket
(drum / hub
assy. position
shown)
Handle Grip
Handle
Handle Lock Pin
Handle Fork
Bed Height /
Angle Control
Wheel Axle
Hook Lock Pin
Wheel
Product Size
(L X W X H)
61-3/8" X 19-5/8" X 17-5/8"

BEFORE USE

1. Read and understand instructional and warning
materials provided with and on this product.
2. Verify that the product and the application are
compatible, if in doubt contact
(888) 332-6419.
3. Thoroughly familiarize yourself with this product, its
components, and the hazards associated with its
use.
4. Inspect drum handler before each use. Do not use
if bent, broken or cracked components are noted.
Ensure that all parts move freely.
5. Consult the vehicle manufacturer's service manual
for proper preparation and procedures for removing
& installing a drum / hub assemblies.
2
Technical Service @