Ryobi RHT500R Manual Del Usuario página 11

Ocultar thumbs Ver también para RHT500R:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Deutsch (Übersetzung der originalen Anleitungen)
Eye and ear Protection
Electric Shock Precaution
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIGNAL
DANGER:
WARNING:
CAUTION:
CAUTION:
SERVICE
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. For service we suggest you return the product
to your nearest authorized service centre for repair.
When servicing, use only identical replacement parts.
WARNING:
Observe all normal safety precautions related to
avoiding electrical shock.
SPECIFICATION
MODEL
Voltage:
Power:
Cutting Capacity:
Blade Length
Blade Speed
Brake Time:
Weight (without cord): 3.5 kg
Sound Pressure Level: L pA : 84 dB(A)
Sound Power Level:
Vibration:
DESCRIPTION
Fig.1
1. Scabbard
2. Cutting blades
3. Safety Guard
4. Front trigger
5. Rear handle with trigger
6. Livetool indicator™
English (Original instructions)
Indicates an imminently hazardous situation, which, if not avoided, will result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
RHT500R
RHT600RL
220-240 V~50Hz 220-240V~ 50Hz
500 W
600 W
24 mm
27 mm
550 mm
600 mm
1500 SPM
1500 SPM
<1s
<1s
3.8 kg
K pA :3.0 dB(A)
L wA : 99 dB(A)
K wA :3.0 dB(A)
a h =3.7 m/s²
K=1.5 m/s²
Wear eye and ear protection when operating this equipment.
Remove plug from the mains immediately if cable is damaged or cut.
7. Cord retainer
8. Lock lever for rotating handle
9. HedgeSweep™ debris sweeper
(only included in RHT600RL, optional available for
RHT500R)
10. Rear handle trigger
OPERATION
WARNING:
Always remove the scabbard before using the
hedge trimmer.
Warning:
1. The blades continue to move for a fraction of a
second after the hedge trimmer is switched off.
2. Do not touch the moving blades.
3. When using the tool always ensure that the cord is
safely held in the cord retainer as described later in
this manual.
INTENDED USE
This hedge trimmer is intended for cutting and trimming
hedges and bushes in domestic use. It is not intended to
be used for cutting above shoulder level.
USING THE CORD RETAINER
When using the hedge trimmer make sure that you
secure your extension cord in the cord retainer as shown
in Figure 3.
If you bought this unit in the United Kingdom with a BS
plug it will have a long cord attached to it. In that case
8
8
MEANING

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rht600rl

Tabla de contenido