Installing The Batteries - Targus Stow-N-Go Guia Del Usuario

Targus Stow-N-Go

Installing the Batteries

• Use the CR2032 battery. (supplied)
• Remove the battery cover from the back of the device.
• Insert the battery, making sure that the positive (+) side
of the battery is facing up to the battery cover.
Connecting the USB Receiver to Your PC
•
Take out the USB receiver attached on the back and plug it into
an available USB port with connecting pins on the receiver facing
the connecting pins in the USB port.
When inserting the USB reciever into the computer's USB port. Please make
sure that the connector pins on the reciever and the pins in the computer's USB
port are facing each other. The link indicator LED will light when connected
correctly.
TM
Media Remote Control Card
connection pins in USB port
5
link
indicator
connection pins on reciever