Listening To The Radio - AEG SR 4339 Instrucciones De Servicio

market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1. Set the function selector (20) to CD/MP3/USB.
2. Connect a USB storage device. USB appears on the dis-
play. After a few seconds, the total number of folders and
titles appears briefly. Playback then begins. The elapsed
playing time is shown on the display and the current track
and folder are displayed alternately.
For operation, please refer to the section "Playing CDs/
MP3".
NOTE:
If there is a CD in the CD compartment at the same time,
keep the PLAY/PAUSE/USB button (14) pressed to select
the USB mode.
CAUTION:
Before removing the USB storage device, switch the func-
tion selector (20) to RADIO.

Listening to the Radio

1. Turn the function selector switch (20) to the RADIO posi-
tion.
2. Use the band selector switch (6) to select the desired
frequency band.
VHF (Stereo) = FM ST., VHF = FM,
Medium wave = AM (Mono)
3. Tune in the desired station with the station adjust-ment
knob TUNING (4).
4. The FM ST control lamp (9) only lights up when you have
selected FM stereo and the station is being received in
stereo quality. If reception is too weak and there is noise
on the station being received, this lamp will flicker. Where
reception is bad we recommend switching to FM.
5. For VHF/FM mode pull out the telescopic antenna (1)
and turn it to improve reception.
6. An aerial is integrated into the device for the reception of
AM stations. The machine can be aligned to the station
by turning it. In this frequency band programs are trans-
mitted in "mono" only.
Playing CDs/MP3
This is how you play a CD
1. Turn the function selector switch (20) to the "CD/MP3/
USB"position.
2. Use the OPEN/CLOSE button (8) to open the CD com-
partment (3).
3. Insert an audio CD with the printed side facing upwards
on to the central cone so that the CD clicks into place
and then close the lid of the CD compartment.
All manuals and user guides at all-guides.com
4. After a few seconds the total number of songs/tracks is
5. The CD will play from the first title. The current track
6. In order to remove a CD, please press the STOP key (11),
Always keep the CD deck closed.
• In the case of CDs in MP3 format that contain folders,
• If a disc is incorrectly inserted - or no disc has been
• Playback of CDs produced by the user cannot be
Description of the CD buttons
PLAY/PAUSE (14)
Press briefly:
You can briefly interrupt and resume playback using this but-
ton. The playing time that has elapsed flashes in the display.
Pressing again continues playback.
Keep pressed:
Select the USB port.
SKIP+/SKIP- (10/17)
When an audio CD, or a CD in MP3 format or file is playing:
With SKIP + you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to
The SKIP - button can be used as follows:
Press once =
Press twice =
Press three times = This plays the song before etc. If the
shown in the display.
NOTE:
In the case of CDs in MP3 format the number of folders
is briefly displayed at first. MP3 also appears on the
display.
and the playing time that has elapsed are shown in the
display.
NOTE:
With CDs in MP3 format the current track and folder
are shown alternately in the display.
open the CD compartment and lift the CD out carefully.
NOTE:
when the device changes to a different folder 001 ap-
pears for the first track of the new folder.
inserted - the symbol "CD READ" and the word "NO
DISC" appear in the display.
guaranteed due to the large variety of software and CD
media available.
search through the tracks.
This starts the current track again from
the beginning.
This jumps back to the previous track.
button is kept pressed down, the
machine starts to search through the
tracks.
English
37