Programming Screen - Selecta Electemp-TFT Manual De Instrucciones

INSTRUCTION MANUAL
100ºC PROG 0 RAMP
95ºC
Step: 2 2ºC/m
75ºC 01:00
100ºC 03:00 OFF
180ºC INF OFF
100ºC 03:00 OFF
100ºC 03:00 OFF
Fig 8.3.2 Run screen operating with tempera-
ture profile.
Step temperature
set.
Red: Step number
Current tem-
Yellow: Waiting.
perature
Green: Reading stored.
White: Reading not stored.
100ºC PROG 2
Step: 1 2ºC/m
95ºC
Nº step on Last ramp run.
running.
Fig 8.3.2b Working screen.
PROGRAMACIÓN
AJUSTES
PROGRAMMING
SETTINGS
TRABAJO
TASK
J
.P. SELECTA s.a.u.
CODE 80080 REV L
8.3.2 Operation with a temperature profile
Time 01:00
00:53
•
2 08:00
MATION» display.
•
02:13
•
•
set point are indicated.
- When RUN is pressed, the profile table disappears and the temperature evolu-
tion graph (in red) and the programmed temperature profile (in green) appear.
The process will end if the STOP icon is pressed or at the end of the program.
The message "Process completed" will appear in a text box. Click on the text box
to accept the completion.
RAMP Time 01:00
00:53
Step set
time.
Step elapsed time.
8.4 PROGRAMMING screen
Go to PROGRAMMING screen to:
•
•
profile n
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
MAY 2019 (It can be modified without notice)
Temperature profiles must be previously programmed from the «PROGRAM-
Select a profile (from 0 to 9) by pressing on keys
Start by pressing on the icon:
In the temperature box (top-left corner) the current temperature and the
Set the temperature profiles.
Set the timed operation for a profile.
(For instance, you can set a time an a week day to start a profile. As : start,
1 on Sunday at 19h00')
er
Page: 22
Tel 34 937 700 877 Fax 34 937 702 362