Control Panel; Use Of The Appliance - Musterring MGI 6001 Manual De Instrucciones

4

Control panel

1 Programme knob
2 Start/cancel button (RESET)
3 Indicator lights
4 Programme marker
5 On/off indicator light
Wash
Dry
End-of-programme
1)
Salt
1) When the salt container is empty, the related indicator light does not come on while a washing
programme operates.
Programme knob and on/off indicator
light
• To set a washing programme, turn the
programme knob clockwise or anticlock-
wise. The programme marker on the pro-
gramme knob must agree with one of the
washing programmes on the control pan-
el.

Use of the appliance

Refer to the following instructions for each
step of procedure:
1. Make a check if the water softener level
is correct for the water hardness in your
area. If necessary set the water softener.
2. Fill the salt container with dishwasher salt.
Indicator lights
Comes on when the washing phase or the rinsing phases operate.
Comes on when the drying phase operates.
Comes on when the washing programme is completed. Auxiliary functions:
• Level of the water softener.
• An alarm if the appliance has a malfunction.
Comes on when it is necessary to fill the salt container. Refer to the chapter
'Use of dishwasher salt'.
After you fill the container, the salt indicator light can continue to stay on for
some hours. This does not have an unwanted effect on the operation of the
appliance.
5
1
– The on/off indicator light comes on (po-
sition ON).
• To set the appliance to the off position,
turn the programme knob until the pro-
gramme marker agrees with the on/off in-
dicator light.
– The on/off indicator light goes off (posi-
tion OFF).
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the dish-
washer.
5. Set the correct washing programme for
the type of load and soil.
4
2
3