Work Pro W WBAR 9610 TR Instrucciones De Uso

2 . AUTO: Selecting one of the 6 built-on program, is possible to change the Speed
of chase (SP on the display from 01 to 99). NOTE: At high values, the chase speed
is more slow. Also is possible to chage de Fade time (Fd on the display from 01 to
99). NOTE: At high values, the fade time is more longer.
3. TEST: Permite comprobar cada color. r 000 en pantalla para rojo, incrementando el
valor, incrementamos la dimmerización. Del mismo modo con g 000 (verde) y b 000
(azul).
4. ADDR: Permite configurar la dirección DMX de cada sección. Así A-01 en pantalla se
refiere el color rojo de la primera sección, A-02 al color ver de la primera sección, y
A-03 al color azul de la primera sección, el resto de valores de manera anaáloga hasta
llegar a A -12 (color azul de la cuarta sección).
5. RUN: Presione y seleccione el modo a ejecutar (AUTO, SOUND, ADDR).
DATOS TECNICOS
Alimentación:
Consumo:
Angulo del haz:
DMX IN/OUT:
Dimensiones:
Peso:
WBAR 9610 TR
AC 230 V 50 Hz, 0.5 A
100 W max.
30º
XLR 3 pin macho/hembra
1310 x 65 x 90 mm
6.5 Kg
4
WBAR 9610 TR
WBAR 96 10 TR is a lighting bar with 96 RGB (32R, 32G, 32B) LEDs of 1W each
one. This disposition of these LEDs allows to create an uniform color along of bar
length.
Thanks to the incorporated lens on each LED, its beam angle not pass 30º, allowing
to set an ultra-bright output.
For its control, this device includes Auto mode (with 6 built. in programs), Sound mode
(using the same programs) and DMX with total control over each section and color of
the device.
OPERATION
All functions are available through buttons placed in the rear panel.
1. Long press over Menu button to enter submenu (AUTO, SOUND, ADDRS,
TEST). Another long press here to back to main menu.
2. Once selected the function in submenu, a short press over Menu button
to set the parameter (display flicks). Using Up/Down buttons to change
the value. Short press over Menu button to confirm.
MENU MODES
1 . SOUND: Selecting one of the 6 built-on program, is possible to change the Speed
of chase (SP on the display from 01 to 99). NOTE: At high values, the chase speed
is more slow. Also is possible to chage de Fade time (Fd on the display from 01 to
99). NOTE: At high values, the fade time is more longer.
WBAR 9610 TR
USER INSTRUCTIONS
1