Publicidad
Idiomas disponibles
Idiomas disponibles
Main screen
Fields
ID Tag
User reference
Input screen
Set the input type by pressing the appropriate button - relevant
fields (as shown below) will appear.
Fields
Engineering unit
Input Low
Input High
Damping factor
# of samples
Description
User defined field (e.g., PT1015-2)
User defined field (e.g., Pump 1015 bearing)
Description
Sets the units used for the input low and high settings.
The input value corresponding to 'zero' (4 mA) output.
The input value corresponding to 'full scale' (20 mA) output.
Sets the damping factor for the inbuilt digital filter. Accepts values from
1-99.
The number of samples averaged for each measurement. The effect of this
setting depends on the input type. Normally set around 50.
11
Publicidad
