Installation Requirements - Premium PWDC202FM Manual De Uso Y Cuidado

INSTALLATION REQUIREMENTS

TOOLS AND PARTS
Gather the required tools and parts before starting installation. The parts supplied are in the washer drum. (Refer
to Figure 3).
Recommended Tools (NOT included with unit purchase)
• 1/4" nut driver 3/8" socket with ratchet
• 3/8" open-end wrench
•
Adjustable wrench or 7/16 socket with ratchet
•
Adjustable wrench or 9/16 open-end wrench
•
Channel-lock adjustable pliers
• Carpenter's level
UNPACKING THE WASHING MACHINE
•
Unpack your washing machine and check for any damage.
•
Make sure all the Included Parts (as shown in Figure 3) are received in the included bag.
•
If there is any damage to the washing machine or any item is missing, contact your local dealer immediately.
DISPOSE OF PACKING MATERIALS
The packing materials for this appliance may be dangerous to children and must be kept away from children and
disposed of properly. Dispose the related packing materials according to the relevant local regulations.
LOCATION REQUIREMENTS
Selecting the proper location for your washing machine improves performance, minimizes noise and prevents
possible washer "walk". Your washer can be installed under a custom counter, in a basement, laundry room,
closet, or recessed area. Refer to "Drain System Options" on page 12 for instructions on proper draining protocol.
Companion appliance location requirements should also be considered. DO NOT install your unit in a bathroom
(or damp room) or rooms that may contain explosive or caustic gases. Proper installation is important for the
operation of your Washer Dryer Combo unit. Before installing the washing machine, the location must be carefully
selected based on the following requirements:
• Rigid, dry, and level surface (if surface is not level, adjust the leg levelers. (Refer to "Leveling the Washer" on
page 13).
•
Avoid exposure of appliance to direct sunlight.
•
Allow sufficient ventilation.
•
Room temperature must be above 32° F (0° C).
•
Keep far away from any heat sources such as electric or gas stoves.
•
Make sure the washing machine will not stand on power cord.
•
DO NOT install the washing machine on carpeted floor or on a rug.
Included Parts
Water Hoses (2)
11
Figure 3
Transport
Cable Tie Hole Plugs (4)