ausdom AGH2 Manual Del Usuario página 3

1
2
5
8
6. Setting up the Product
1. Turn on your computer.
2. Connect the headset to a computer USB port.
Note:
- The USB driver will be installed automatically. Do not remove
the USB cord during the process of USB driver installation. If
the driver installation fails, the headset can't work.
- Once the USB driver installation is completed, the headset is
ready for use. The default setting is that the volume is in the
middle of sound level, microphone function is on, vibration
function is off, and the LED indicators of the headset are solid.
- When plug in Apple computer, It needs to set the output
audio device to "USB Audio Device".
- For W in 10 s y s te m, it n ee d s to i ns t a l l t he
software(AUSDOM AGH2 USB Driver for WIN 10. exe)
from www.ausdom.com to get the 7.1 virtual sound track.
7. Control Instructions
3
7
EN-2
V+
V-
4
5
6
10
11
9