Using The Remote Control; Connecting External Devices - Kicker iKICK iK350 Manual Del Propietário

USING THE REMOTE CONTROL

The Infrared Remote Control enables you to control your iPod and access the iK350 System Menu from a convenient
location. With the fully featured remote control it is easy to access all of your iPod's music and/or video content.
Figure 5
Power On/Off
Mute On/Off
Change Treble, Bass and
Input Source options for
the iK350
Skip Backward
(Hold down to Rewind)
Navigate upward through the iPod menu directory or
increase values within the iK350 System Menu.
Press the up arrow while in the Input Source Menu to
enable the Aux input.
Make selections and enter sub-directories within the iPod.

CONNECTING EXTERNAL DEVICES

To connect an external video display to the iK350, make sure the video output is enabled on your iPod device. Connect
a standard RCA composite video cable from the composite video output on the back of the iK350 to the RCA video
input on your external video display. See Figure 3. This is a pass-through connection. If there are any problems with your
external video display, refer to the iPod device manual or the instructions packaged with your external video display.
To connect an external audio device to the iK350, enable Aux-In mode with the rotary or remote control as described in
the Input Source section on the previous page. Connect your line level device to the 1/8" stereo input on the back of the
iK350. See Figure 3. If the sound is distorted, you may be overdriving the auxiliary input. Try turning down the external
device until the sound is no longer distorted. Note: 1st – 3rd Generation iPods will require the use of the auxiliary input for
audio playback.
To use an external audio device for output, connect the RCA outputs on the back of the iK350 to the input(s) of your
third-party device. The audio output is at a fi xed level and not adjustable with the iK350 volume control. Use your external
audio device to attenuate the input/output level.
iK350
Navigate downward through the iPod menu directory or
reduce values within the iK350 System Menu.
Press the down arrow while in the Input Source Menu to
disable the Aux input.
Navigate toward iPod root directory.
Volume Up
Volume Down
Play/Pause
Skip Forward
(Hold down to Fast
Forward)
5