1. Never poke any kitchen utensils such as spoons, knives, etc. into the rotating Beaters.
2. Do not reach into the mixing bowl while Beaters are rotating.
3. The Hand Mixer is designed for short-time operation, a maximum of 10 minutes of
continuous mixing. Switch it off after 10 minutes and allow the motor to cool for 30
minutes.
4. To avoid excessive spattering and flour dusting, lower the Beaters fully into the ingredients
that are to be processed before turning the Mixer on and turn off before removing.
5. Start at the lowest setting to prevent the dry ingredients from dusting and the liquids
from spattering. You can vary the speed settings while the hand mixer is in use.
6. Use a higher setting for heavier dough.
7. After 9 minutes 59 seconds the Timer goes back to '00'.
Setting 1:
To start mixing ingredients
Setting 2 & 3:
Low speed - to mix dry ingredients, to fold in or blend ingredients
Setting 4:
To mix liquid ingredients or when adding liquids to dry ingredients
Setting 5 & 6:
Particularly suited for dry ingredients
Setting 7:
For the alternate addition of dry and liquid ingredients
Setting 9 & 10:
Medium speed - to mix packaged cake mixes
Setting 11:
To whip butter and sugar icings
Setting 12 & 13:
To beat to a light fluffy consistency
Setting 14:
To whip mashed potatoes
Setting 15:
To whip cream
Setting 16:
High speed – to whip egg whites
CARE AND CLEANING INSTRUCTIONS
1. Before cleaning the Hand Mixer, ensure the power cord is unplugged from the electrical
outlet.
2. Remove Beaters immediately after use.
3. Wipe the outside area of the Hand Mixer with a damp cloth and dry with a soft cloth.
4. Wipe excess food particles from the power cord.
5. DO NOT immerse the Hand Mixer or power cord and plug in water or any other
liquid.
6. DO NOT use harsh detergents or abrasive cleansers on any parts of the appliance.
7. Wash the Beaters in warm soapy water or in the dishwasher.
8. Store the Hand Mixer in a dry accessible place.
9. DO NOT wind the power cord around the Hand Mixer body as the residual heat from the
motor may damage the cord.
HINTS
SUGGESTED SPEED SETTINGS:
3