Playing Back Pattern; About Patterns; Selecting A Pattern; Playing Back A Pattern - Oqan QPD-10 Manual De Instrucciones

About Patterns

There are 30 preset patterns in this digital drum, please
refer to the Pattern List for details. In Pattern mode, you
can select the pattern number and adjust the volume of
the pattern.

Selecting a Pattern

1. Press the [PATTERN] button to enter pattern mode. The
Pattern indicator will light up, and the 3-digital LED will
display the number of current pattern.
2. Press the [+] or [-] button to select a pattern. Holding
down the [+] button, the pattern number increase rapidly,
while holding down the [-] button, it decreases rapidly.

Playing Back a Pattern

1. Press the [START/STOP] button to start playing back
pattern.
2. Press the [START/STOP] button again, stop playing
back the pattern.

Adjusting the Pattern Volume

1. Double click the [PATTERN] button, and then the pattern
volume page will be selected.
2. Use the [+] or [-] button to adjust it. It will restore to
default value on the next power on.
3. If there isn't any operation in pattern volume page for
more than 4 seconds, it will automatically return back to
the last menu.
The range of pattern volume: 0~32. And the default value
is 25.

Playing Back Pattern

13