Reverb; Record; Playback - Oqan QPD-7 ADVANCED DRUM Manual De Instrucciones

Reverb

Press [ reverb ] button to enter reverb function. In
this menu, the digit on far left of LED will display
letter 'R'.
The two digits on the right will display current
reverb level.
The button select [+] / [ ] or [dial] can be used to
adjust the reverb level (0-3, not loop). This value
will be autosaved after adjusted.

Record

Prepare to Record
Select the desired song, drum kit, tempo, drum off
setting, and reverb settings.
Start Recording
Press the [rec] button, the light start flashing.
Press the [start/stop] button or strike the pad, the
light stop flashing and the recording process starts.
Stop Recording
To stop recording, press the [start / stop] button or [
rec ] button. The record indicator will turn off. If the
memory isfull, "FL" will appear on the display and
recording process stops automatically
Note: When you start the recording, the vocal
metronome also starts to count. But the sound of
the vocal will not be record.
To stop the metronome, press the [click] button.

Playback

Press the [play/stop] button will start or stop playing
recorded song.
Note: When you record a new song, it will replace the
previous recording.
The song data recorded will be lost when you turn
off the power.
11