Technical Information
OBH230
H
D
Specification
Width (W)
Height (H)
Mounting Pipe (D)
Capacity
Net Weight
Pre-Installation
Check for damage during shipment. Do not install or use a damaged product. Ensure that the spindle is
functioning properly. Be sure to maintain records of all accompanying product information.
Contact your OZ Lifting Products LLC® dealer if there are any problems.
Before initial operation:
Read and comply with all instructions and warnings furnished with or attached to the product as applicable.
Operation
Warnings & Precautions
OBH MOUNTING ARM BRACKET operators should read and fully comprehend this entire manual and
all warnings on the clamp before beginning clamp operation. If this manual is not read and followed
completely injuries may occur.
All Operators MUST:
• Be trained in proper swing arm operation and in dealing with potential malfunctions.
• Abstain from use of alcohol, medications, or drugs while operating.
• Avoid operation while tired or distracted.
• Avoid operation if they have a history of seizures or other medical issues that may interfere with operation.
• Have proper coordination and vision.
W
OBH230-WALL
H
OBH230
40 1/2 inches
17 3/4 inches
2 inches
1000 pounds
26 pounds
pg.5
EN
W
OBH230-WALL
40 1/2 inches
17 3/4 inches
n/a
1000 pounds
31 pounds