Reversing The Door Swing Of Your Appliance - Climadiff AVINTAGE AV24XI Manual De Utilización

REVERSING THE DOOR SWING OF YOUR APPLIANCE

Should you desire to reverse the opening direction, please follow the instructions below.
1
2
3
Note: All parts removed must be saved to do the reinstallation of door.
1. Detach the stop mechanism (12) by unscrewing the three screws (11) and two screws (13)
2. Close the glass door, and remove the decoration plug (2). Unscrew the top hinge pin (3) and lower hinge pin (8). Be
careful to support the glass door with hands to prevent it from dropping after removing the pins.
3. Pull out to remove the glass door and place it on a padded surface to prevent scratching it.
4. Remove the right top hinge plate (4) by unscrewing the four screws (1) and get the left top hinge plate (6) from the
plastic bag that includes the instruction manual then install it at the designated position on the opposite side.
5. Remove the lower hinge plate (7) by unscrewing the four screws (9). Then turn it around and refit it on the opposite
side.
6. Turn around the glass door 180° and refit the hinge pin (3) & (8) through the top hinge plate (6) and lower hinge plate
(7) into the door. Make sure that the spacers which the hinge pins sit on are correctly positioned.
7. Leveling the door by adjusting the screws that are used to fix the top hinge plate and lower hinge plate.
8. Re-install the stop mechanism on the opposite side accordingly
① Screw
② Decoration Plug
③Top Hinge Pin
④ Right Top Hinge Plate
⑤ Glass Door
⑥ Left Top Hinge Plate
⑦ Lower Hinge Plate
⑧ Lower Hinge Pin
⑨ Screws
⑩ Cabinet
⑪ Screws
⑫ Stop Mechanism
⑬ Screws
⑭ Bottom bracket
29