Cobra 5452 Manual De Instalación página 8

OPERATION
I
The 5452 sensor is designed to indicate all changes in vehicle
position. It indicates movements both the longitudinal and late-
ral axis. It can be used to indicate any attempt to steal the
F
wheels of the vehicle or raise and tow it. The sensor is enga-
ged when the alarm system is switched on and takes 90
seconds to store the reference position of the vehicle. After this
GB
time lapse, all movements detected with respect to the stored
position generate an alarm. Fast movements are detected
immediately, while slow only when the jacking up speed is
E
higher then 0.6° per minute.
The vehicle has to be jacked up in exceed of 1.8° to trigger the
alarm.
D
P
CONTENTS OF KIT
1 5452 sensor
1 strip of bi-adhesive tape
NL
1 connection cable
1 installation instructions booklet
TECHNICAL SPECIFICA TIONS OF SENSOR
Rated voltage...........................................................12VDC
Working voltage..................................................9/16 VDC
Input.....................................................................< 4.6 mA
Operating temperature....................................-40C°/+85C°
Alarm threshold..................................... ......1.8°+/- 0.4°
Detected speed....................................................>0.6°/min
5