Publicidad
Idiomas disponibles
Idiomas disponibles
REPLACING MEMBRANES
Flip the water collector ring upside down and remove the 6 screws. This will allow the membrane and the
mounting ring to be removed.
AS200 OPTIONAL EXTENSION MAST BRACKET
The extension mast bracket serves as a stable mounting point for the
extension mast to press upon. Place the extension mast on the stub of
the bracket and the bracket in the slot of the base, then extend the mast
to brace it against a solid immovable surface for secure fixing of the drill
stand.
OPTIONAL VACUUM BASE
The vacuum base is available for use with the AS200, S350 and S500. Use
the fixing kit supplied with the vacuum base to mount the vacuum base
to the base of the drill stand. The S350 and S500 should use the anchoring
plate. Place the base of the drill stand so that it is centered on the vacuum
base. Follow the instructions included with the vacuum base.
WARNING: Always use additional safety chains when drilling
horizontally.
WARNING: Never drill inverted when using the vacuum base.
AS200
Fixing Kit
Fixing Kit
Vacuum Base
7
extension mast
200mm Model
Fits in slot in
Extension Mast Bracket
base of drill stand
Extension Mast Bracket
S350, S500
Fixing Kit
Anchoring Plate
Fixing Kit
Stub fits in
Extension Mast
Publicidad
