Attach To A Windshield - Nokia HH-12 Manual Del Usuario

Check that the deployment of the
airbag is not blocked or impaired in
any way.
Ensure that the mounting device or
mobile holder is not installed where
you might come in contact with it in
the event of an accident or collision.
Periodically check that the suction
cup at the bottom of the mounting
device is firmly attached to the

Attach to a windshield

Locate a safe mounting surface on
the windshield, and clean the surface
thoroughly with a glass cleaner and a
clean towel. If the ambient
temperature is below +15°C (60°F),
carefully warm the surface and the
suction cup with a hair dryer to
ensure a firm grip on the windshield.
Ensure that you do not heat the
windshield, especially if the ambient
temperature changes a lot.
Never leave the mounting device
inside the vehicle in direct sunlight or
in excessive heat. The mounting
device and suction cup may be
damaged and adhesion may be
impaired if the inside temperature
exceeds +70°C (160°F).
windshield excessively to avoid
damage to it.
Press the suction cup at the bottom
of the mounting device firmly on the
windshield (see step 1 at the start of
this guide), and carefully push the
locking lever inside the mounting
device (2) towards the suction cup to
create a vacuum between the suction
ENGLISH