Toro XTRA SMART Guia De Instalacion Y Configuración página 5

5. When your watering schedule has been completed, the
file will be automatically saved to the PC hard disk.
6. Connect the Smart Pod to the PC using the provided
USB cable.
Note: The USB connection to the Smart Pod is confirmed
when the green
displays Smart Pod Recognized, and switches
the Pod symbol from black to green.
7. Click on Send Schedule to begin transferring the
watering schedule to the Smart Pod. The green
indicator will blink rapidly during the transfer process.
8. A confirmation box will be displayed when the transfer
process has been successfully completed. Click OK to
continue, then disconnect the USB cable.
9. With the EC·XTRA control dial in the RUN position,
carefully plug the Smart Pod into the timer receptacle
as shown. The red
blink in unison.
10. Press and release the ENTER button to begin transfer-
ring the watering schedule to the EC·XTRA. The green
indicator will blink momentarily, and the timer will
display donE when the transfer process is complete.
Important: The ENTER button must be pressed within two minutes of the initial Smart Pod/EC·XTRA
connection to accomplish the watering schedule transfer. If the two-minute period elapses without pressing the
ENTER button, remove the Smart Pod, then repeat steps 9 and 10 above.
Weather Sensor Doc Rev A.indd 5
indicator is On. The Scheduling Advisor
and green indicators will
5
12/23/10 3:44 PM