JBL TempSet Indicaciones Para El Montaje página 5

JBL TempSet
Installation set
for bulbs and spot lights *
in the terrarium
E27 ceramic fitting with thread, 1.5 m cable and switch pre-fitted.
To safely install spotlights e.g. JBL SOLAR UV Spot in the terrarium
Fits all lamps up to 250 W with E 27 threaded socket.
Installation instructions:
Required for installation:
Electric drill or cordless drill with 4.5 and 8 mm HSS bit, compass saw with metal
saw blade, screwdriver, metal file.
1. Attach the self-adhesive drill and saw template provided in the position intended
for the TempSet on the exterior of the upper ventilation grid of the terrarium.
2. Make the holes and the cut-out according to the instructions on the template.
Smooth the edges with a file and remove the template.
3. Feed the cable with the plug and switch through the large opening from the inside
to the outside. Secure the cover of the TempSet by screwing the two screws
provided from the outside through the pre-drilled holes in the ventilation grid into
the thread of the cover and tighten.
4. Screw the bulb or spotlight required into the fitting and then connect to the mains
supply.
UK