Publicidad
Idiomas disponibles
Idiomas disponibles
installation
instructions
1.
Clean Bathtub thoroughly and wipe dry
before applying rail. Contact surfaces
must be dry and free of soapy residue to
assure secure installation.
2. Deploy knob (A) and open until rail is
wide enough to slip on side of bathtub.
3. Place Safety Rail on bathtub with knob
(A) facing outside of tub and tighten until
rail feels tight and secure.
4. To test installation of rail, pull forward,
back and side to side. If rail slips or
moves, make sure surface is free of soapy
film and is dry, then replace at desired
location and retighten.
Safety rail often requires retightening from
time to time. Check periodically before use
and retighten as needed.
CAUTION:
Please use extreme care when installing on fiber-
glass tubs. DO NOT OVERTIGHTEN as the clamp
may crack the fiberglass. This bathtub safety rail
provides support and increased stability for an
individual weighing up to 300lbs. This item is NOT
designed to support the total weight of an individ-
ual. Use the bar for assistance only. The maximum
horizontal capacity is 100lbs (45 KG).
Rev.4.04.27.16
Item # 12039
Item # 12044
A
A
Publicidad
