Listening To The Radio; Using An Usb Device - LG XA14K Manual De Instrucciones

XA14-LGEMS_ENG 9/3/09 3:31 PM

Listening to the radio

Make sure both for the FM and AM(Optional) aerials to be stretched to
the most. To change the tuner from stereo to mono to improve FM
reception, Press .
B B []
1. Select FM or AM(Optional).
2. Select the radio station
3. To 'save' a radio station: A preset
number will show in the display.
4. Select the preset number
5. To confirm press: Up to 50 radio
stations can be saved.
6. To select a 'saved' station
Looking for radio stations automatically
1 Press and hold TUNING (-)/ (+) on the unit or TUN.- / TUN.+ on the remote
control for more than 0.5 second.
2 The tuner will scan automatically and stop when it finds a radio station.
Deleting all the saved stations
1 Press and hold PROGRAM/MEMORY on the unit or PROGRAM/MEMO on
the remote control for two seconds. "ERASE ALL" shows.
2 Press PROGRAM/MEMO on the remote control to erase all the saved
stations.
Seeing the information about your radio stations - OPTIONAL
The FM tuner is supplied with the Radio Data System (RDS) facility. Press
RDS on the remote control several times to view the information about the
radio station being listened to.
PTY - Program Type, such as News, Sport, Jazz.
RT - Radio Text, the name of the radio station.
CT - Time Control, the time at the location of the radio station.
PS - Program Service name, the name of channel.
You can search the radio stations by program type by pressing RDS.
The display will show the last PTY in use. Press PTY one or more times to
select your preferred program type. Press . bb/BB > (bb/BB). The
tuner will search automatically. When a station is found the search will stop.
8
Page 8
ON UNIT ON REMOTE
FUNCTION FUNCTION
TUNING (-)/ (+) TUN.- / TUN.+
PROGRAM PROGRAM/MEMO
/MEMORY
PRESET(-)/ (+) PRESET/FOLDER
PROGRAM PROGRAM/MEMO
/MEMORY
PRESET(-)/ (+)
PRESET/FOLDER

Using an USB device

You can enjoy media files saved on an USB device by connecting the
USB device to the USB port of the unit. For [Creating your own playlist]
and [Random/Repeat play], refer to the CD playback section.
1. Connect the USB device to the
USB port of the unit.
2. Select the USB function.
3. Select a file you want to play.
4. Start your media playing.
5. To stop, press
6. Before disconnecting the
portable USB device, change to
any other function.
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB 2.0 or USB 1.1.
• The USB function may not be available depending on devices.
• Devices which require additional program installation when you have
connected it to a computer, are not supported.
Look out for the following
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be
searched.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not
recognized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.
• This unit is not supported when the total number of files is 1000 or more.
• External HDD, Locked devices or hard type USB devices are not supported.
• USB port of the unit can not be connected to PC. This unit can not be used
as a storage device.
ON UNIT ON REMOTE
- -
FUNCTION
FUNCTION
. b b b b / B B B B > . >
bb/BB
B B / []
B B []
x x
x x
FUNCTION
FUNCTION