Display; Connecting To An Electrical Outlet - Bematech FIT Basic Guía De Referencia Rápida

Quickstart Guide of Microterminal FIT BASIC

Display

For a better view of the display information, lift or lower the display gently as
shown below.
Display fully lowered

Connecting to an Electrical Outlet

Make sure the microterminal is turned off. Connect the power supply adapter
according to your outlet standard (there are two adapters, as shown below). The
power supply is full range from 100 to 240 Vac.
Place the adapter of the power connector into the supeior part of the power supply.
Turn it clockwise ultil you hear a click of grip.
6
Display fully lifted
máx. 30º