General Information - Anthron AS-05 Manual De Usario

GENERAL INFORMATION

Packing, storage, maintenance and cleaning
Each product is packed with its INSTRUCTIONS FOR USE in a card box. Proper
maintenance and storage are imperative to ensure correct functioning of the
product (as well as all your equipment) and thus your safety.
Clean the product with a brush under running cold water of domestic supply. If the
stains persist, clean it in warm water (maximum 30 °C) with ordinary soap. Then
rinse thoroughly, wipe it with a towel and dry naturally in a shaded ventilated place
away of sources of heat. If needed, lube sparingly the moving parts of a clean device
with silicon based oil.
Temperatures
While it is allowed to use this product within the temperature range from -40 °C to 80
°C, it is advisable to stock it in a dry place at room temperature.
Lifetime and service time
Lifetime of the product is set by the date of production and is theoretically unlimited.
Service time starts with the date of first use and depends on frequency and mode
of application, on the environment where it is used (marine, cave, corrosive
atmosphere), and on mechanical wear and damage. Provided its correct use (in
concordance with these instructions), the service time at average use is expected to
be 7 years.
Guarantee and limitations
This product is guaranteed for 3 years from purchase against any faults in materials
or manufacture. The guarantee does not apply in cases of misuse, normal wear,
unauthorized modifications or alterations, improper use, improper maintenance,
accident, negligence, damage, or if the product is used for a purpose it was not
designed for. If you discover a defect, return the product to the reseller you purchased
the product from or directly to ANTHRON.
ANTHRON is not responsible for the consequences of direct, indirect, accidental
or any other type of damage or injury resulting from the use of its products.