Making The Electrical Connections - Commercial Electric 54655241 Guía De Uso Y Cuidado

installation (continued)
3
Feeding the wires
nOTe: Put the gasket (BB) on any knock out hole on the fixture to better protect the wires.
□
Feed the electrical connection wires through any knock out hole, through the gasket (BB), and then through
the mounting bracket (AA). The connection wires can be held in place by the metal tabs, if needed.
BB
4

Making the electrical connections

□
Insert the hot and neutral (black and white)
wires from the electrical box into the wire
connectors of the same color wires from the
housing (A).
□
Insert the grounding wire from the electrical
box into the wire connector attached to the
green wire from the housing (A).
AA
5
Wire
connectors
AA
A
5
Please contact 1-877-527-0313 for further assistance.
Metal tabs
Knock out holes
Attaching the mounting bracket
to the electrical box
□
Position the wires back inside the electrical box.
□
Mount the mounting bracket (AA) to the electrical
box using the two electrical box screws (CC).
CC
Wire
connectors
AA
HOMEDEPOT.COM