Installation; Clearance - Zenith ZW5010 Manual Del Propietário

Ocultar thumbs Ver también para ZW5010:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Clearance

Proper clearance enhances the cooling efficiency of the unit and prevents heat
radiation of the condenser.
1. If a storm window presents interference, fasten a 2" wide wood strip to the inner
window sill across the full width of the sill. The wood strip should be thick
enough to raise the height of the window sill so that the unit can be installed
without interference by the storm window frame.
2. See Figure. B. The top of the wood strip should be approximately
than the storm window frame (Storm Window Frame) or wood strip (Outdoors)
to help condensation to drain properly to the outside.
3. Install a second wood strip (approximately 6" long by 1
thickness as first strip) in the center of the sill flush against the back off the
inner sill. This will raise the L bracket as shown Figure. B.
4. If the distance between Storm Window Frame and Wood Strip Mounted on Top
of Inner Sill is more than 1", two of wood strips are not necessary.
Inner Sill
Indoors
Figure. A
Wood Strip Mounted
on Top of Inner Sill
Inner Sill
Outer Sill
Outdoors
1
/
" wide and same
2
1" Max.
Wood Strip for
L Bracket
Indoors
Figure. B
Owner's Manual 13

Installation

3
/
" higher
4
3
/
"
4
Clearance
Storm
Window
Frame
Outer Sill
Outdoors

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido