Publicidad
For the unit to work correctly and to last longer, it is
recommended that the installation is carried out by a
professional.
Disconnect from the mains before handling and only replace
the bulb when it has cooled down.
ASSEMBLY INSTRUCTIONS
Clamping range without wire protection 0.5 – 6 mm² rigid wires.
Clamping range with wire protection 0.5 – 4 mm².
Wire skinning length 6 mm .
A
Unscrew finial
.
Pass the canopy through de shade’s hole, and lean the shade of
the lamp body.
C
D
Unscrew rod B, separate canopy
from support
.
D
Screw support
to the ceiling.
D
To regulate the luminaire height, unscrew thread
and pass
E
stainless steel wire through the strain relief
. To release the
stainless steel wire press axis E and screw again thread D.
Pass electrical wire through the canopy hole and block it with
G
the strain relief
.
H
Connect to the mains
.
B
Fix the canopy canopy and block it with rod
.
Place bulbs.
E
Place diffuser and screw finial
.
Publicidad
