Installation; Mounting The Pdu - Tripp-Lite PDU15NET El Manual Del Propietario

Installation

Mounting the PDU

The PDU supports three primary mounting configurations: 0U Rack (Vertical), Wall and
Under-Counter.
Note: Regardless of configuration, the user must determine the fitness of hardware and procedures before
mounting. The PDU and included hardware are designed for common rack and rack enclosure types and may
not be appropriate for all applications. Exact mounting configurations may vary. Screws for attaching the
mounting brackets are included. Use only the screws supplied by the manufacturer or their exact equivalent
(#6-32, 3/16" flat head).
1-1
0U Rack Mounting: Use 2 screws
to attach each of the 2
A
mounting brackets
as shown. Mount the PDU
vertically by inserting 2 or more
user-supplied screws
the mounting brackets
mounting points in the rack or
rack enclosure.
1-2
Wall Mounting: Use 2 screws
to attach each of the 2 mounting
brackets
Mount the PDU to the wall by
inserting 2 or more user-supplied
screws
C
brackets
mounting points.
1-3
Under-Counter Mounting: Use 2
screws
A
mounting brackets
as shown. Mount the PDU under
the counter by inserting 2 or more
user-supplied screws
the mounting brackets
secure mounting points.
15-09-410-9334F3.indb 3
to the PDU
B
through
C
and into
B
to the PDU as shown.
B
through the mounting
and into secure
B
to attach each of the 2
to the PDU
B
through
C
and into
B
B
1-1
A
B
1-2
A
1-3
3
C
A
C
C
A
C
A
B
C
10/30/2015 9:44:18 AM