Installation Instructions
7
INSTALL SUPPORT BRACKET
AND FOAM TOP WINDOW
GASKET
A
CAUTION
To prevent broken glass
or damage to windows,
on vinyl or other similarly
constructed windows,
attach the window locking
bracket to the window side
jamb with one screw.
Cut the foam top window gasket to the window
B
width.
Stuff the foam
C
between the glass
and the window
to prevent air and
insects from getting
into the room.
NOTE: If the gasket supplied does not fit your
window, obtain appropriate material locally to
provide a proper installation seal.
49-7771
8
Vinyl
A
Wood
B
C
INSTALL FOAM INSULATION
Additional insulation is provided with your window
air conditioner to reduce heat leakage into the
home, reducing overall energy usage.
After the air conditioner is installed in the window
measure the length of the accordion for both
sides.
Cut the foam insulation to the measured length of
the left and right side accordion.
NOTE: Be sure to measure each accordion
because the length could be different on each
side.
Remove adhesive from back of foam insulation.
Stick the foam insulation onto the left and right
accordion, and inside of the frames.
NOTE: Be careful to cover the entire
accordion.
11