Publicidad
Idiomas disponibles
Idiomas disponibles
Keyboard Functions (cont.)
Type Options
You can change the look of the text using the Type key.
1. Press the Type Key.
Bold
Off
On
Underline Off
On
Exp/Cond 50% to 200% in 10% increments
Italics
Off
On
Vertical
Off
On
Pos
Normal, Subscript, Superscript
Press Escape.
2. Change the type size to .25". To do this, press Size key, then type in 2, then 5,
then Enter. Select Change at start, then press Enter.
3. Type the following:
Line 1
Type: Underline Press: Enter
Line 2
Type: Expand
Press: Enter
Line 3
Type: Italics
4. Go to the beginning of line 1. Press the Type key. Use the down cursor key to
cursor to "Underline". Use right cursor key to turn it "On". Press Enter.
5. Place the cursor at the beginning of Line 2. Press Type key. Use the down cursor
key to move to "Underline", then the right cursor key to turn it "Off". Cursor
down further to "Exp/Cond" and use the right cursor key to expand type to
150%.
Press Enter.
6. Place the cursor at the beginning of Line 3. Press Type key. Use the down cursor
key to move to "Exp/Cond" and the right cursor key to reset the value to "100%".
Cursor down further to "Italics" and use the right cursor key to turn "On".
Press Enter.
7. Press Print/Stop.
8. Clear all
(press Clear, Enter, Enter).
©2003 All Rights Reserved
(100% is default)
Defaults, Saving (cont.)
Label Format
Other Format settings that can be changed through the Format key are:
Frame – Thin, Medium, Wide, or No Frame
Justify Text – Right, Center, or Left
Mirror – On or Off
Let' s use some format options.
1. Type the following:
Line 1
Type: Let's do Press: Enter
Line 2
Type: format options
2. Press and release the 2nd key, wait a moment, then press the Format key.
3. Press the down arrow key to Frame. Use the right arrow key to turn on or select a
medium frame. Press Enter
(Note: if you don't press Enter, the change won't be accepted)
4. Press Print/Stop.
We only did one of the several options. Take a few minutes to experiment with
other format options.
IMPORTANT: the "Clear, Use Defaults" Clear function
5. To clear the labels after making Format changes, press Clear key, then cursor
down to "Use defaults". This will clear the frame on future labels.
Setup Key
This key sets the operating system defaults which will be in effect each time you
turn the machine on.
1. Turn OFF machine. Wait 5 seconds. Turn ON Machine.
2. To change a default setting, like type size, press and release the 2nd key, wait a
moment, then press the Setup key.
3. Cursor to "Type size:" and change to 1.0" (press 1, then 0, then 0). Press: Enter.
4. Turn OFF machine. Wait 5 seconds, Turn ON machine. Press the Size key. Notice
the size has now changed to 1.0" when the machine is turned on.
5. Spend a few minutes experimenting with the other setup defaults.
8
.
Publicidad
