speed. Both LOW and SLEEP indicators will be on. LOW wind comes out 10 seconds and
stops 5 seconds alternately every 15 seconds until power off.
Note: To avoid overcooling, do not adjust the direction the wind to the human body.
HIGH speed+ NATURE mode:
Press the NATURE button when SPEED mode is HIGH to set NATURE mode with HIGH
speed. Both HIGH and NATURE indicators will be on. The wind speed will automatically
change with time as follows:
-HIGH speed 5 sec. LOW speed 5 sec. MED speed 5 sec. stop 5 sec. MED
speed 10 sec. HIGH speed 10 sec. MED speed 5 sec. LOW speed 5 sec.
stop 5 sec. MED speed 5 sec. HIGH speed 5 sec. LOW speed 5 sec. stop 5
sec. The unit will work circularly in the mode until power off.
MED speed + NATURE mode:
Press the NATURE button when SPEED mode is MED to set NATURE mode with MED
speed. Both MED and NATURE indicators will be on. The wind speed will automatically
change with time as follows:
-MED speed 5 sec. LOW speed 5 sec. MED speed 5 sec. LOW 5 sec. stop
5 sec. MED speed 10 sec. LOW speed 10 sec. MED speed 5 sec. LOW 5
sec. stop 5 sec. MED speed 5 sec. LOW speed 5 sec. stop 5 sec. The unit
will work circularly in the mode until power off.
LOW speed + NATURE mode:
Press the NATURE button when SPEED mode is LOW to set NATURE mode with LOW
speed. Both LOW and NATURE indicators will be on. The wind speed will automatically
change with time as follows:
-MED speed 5 sec. LOW speed 15 sec. MED speed 5 sec. LOW 15 sec. stop 5
sec. MED speed 5 sec. LOW speed 10 sec. MED speed 5 sec. LOW 10 sec.
stop 5 sec. MED speed 5 sec. LOW speed 20 sec. stop 5 sec. The unit will
work circularly in the mode until power off.
SPEED button
1.
When the POWER button is pressed, HIGH speed indicator "HIGH" will be on and the
strongest wind comes out.
2.
Press the SPEED button once, the MED speed indicator "MED" will be on and the mild
wind comes out.
3.
Now Press the SPEED again, the LOW speed indicator "LOW" will be on and the weak
wind comes out.
SWING button
Press the SWING button, the indicators will be on and the swinging wind comes out. It can
cover 60 degrees horizontally. Press it again to stop at desired position and the indicator
turns off.
TIMER button
1.
Press the "TIMER" button to adjust timer setting. Every press adds 60 minutes up to 9 hours.
The set period is indicated on the display.
2.
To clear timer mode, press "TIMER" button 9 times (one more press after reaching 9 hours);
the "TIMER" indicator will be off.
COOL button
1.
Press COOL button, If the water reach the level, the "COOL" indicator will be on and the
pump starts to work.
2.
After about 3 minutes, the comfortable cool wind with moisture comes out.
3.
Press it again to shut off. The COOL indicator turns off then fresh and dry wind comes out.
39