Auto-Switch Off - Koenic KHC 500 Manual De Instrucciones

English
Curls styling
Divide the hair before styling. Smoothen out
the underlying strands first.
Plug the mains plug into a wall socket.
1
Press the on/off switch to turn on the
2
product.
Set a temperature.
3
Hair type
Fine, dyed or
bleached
Normal
Thick or strong
The set temperature is shown on the
4
display.
Press down the lever and place a strand
5
of hair between the curling iron and clamp
tongue.
Note:
• Thinner streak for smaller curls
• Larger streak for broader waves
Now, rotate the curling iron in order to wrap
6
the hair around the rod. Wait for about 10
seconds, until the lock has formed.
Again unwind the strands of hair from the
7
curling iron and open the clamp tongue.
Allow the hair to cool before styling.
Turn off the product after use.
8

Auto-switch off

For safety reason, the product
will switch off automatically
after 60 minutes.
14
IM_KHC500_140617_V03_HR.indb 14
Temperature level
120°C-140°C
160°C-180°C
180°C-200°C
60
min
Cleaning and care
Note
Never use solvents or abrasive cleaning
agents, metal, or pointy objects for cleaning.
Disconnect the power plug and allow the
9
device to cool off prior to cleaning.
Clean the exterior surfaces of the product
10
with a small brush or dry cloth.
Caution: Never submerge the device in
water or any other liquid while cleaning.
Technical Data
Rated voltage:
Rated input power:
Rated frequency:
Protection class:
Do not dispose of this appliance as
unsorted municipal waste. Return it
to a designated collection point for
the recycling of WEEE. By doing so, you will
help to conserve resources and protect the
environment. Contact your retailer or local
authorities for more information.
100 - 240 V~
35 W
50/60 Hz
II
17/6/14 12:00 PM