MOUNTING HARDWARE
Installing the Mounting Hardware on the Comfort Solid Seat Pan. All required tools are provided. The Comfort Solid
Seat Pan is sold separately.
WARNING: The BODILINK Medial Knee/Thigh Support is intended for use ONLY with the Comfort Solid Seat Pan. Using
this product with other seat pans may result in damage to the seat pan and risk to the user.
Note: The pad may already be installed on the hardware.
1 Remove the cushion from the wheelchair. Using the 4mm hex key, remove the M6 button
head screws (A), the safety washers (B), and the washers (C), from the hardware (E).
2 Line up the M6 button head screws (A), the safety washers (B), the washers (C), and the
front four holes on the Comfort Solid Seat Pan (D) with the hardware (E).
3 Tighten the M6 button head screws (A), using the 4mm hex key.
Note: The hardware will not attach if there is interference with the crossbar (F) on the Comfort Solid
Seat Pan (D). Refer to the "Interference" warning in the "Important Safety Information" section.
BodiLink Medial Knee/Thigh Support Operation Manual
5
A
B
C
D
F
E
Small Hardware