PDF created with FinePrint pdfFactory Pro trial version
Troubleshooting (Cont)
PROBLEM
- Check the speaker settings. Turn up the
No sound
- Press MUTE on the remote control to turn
- Unplug the headphones.
- Remove any obstacles between the remote
Remote control
doesn't work
- Use the remote control near the portable TV.
- Point the remote at the IR sensor on the TV.
- Replace the battery in the remote control.
The on screen
The OSD Duration may be set to low. Press
menu disappears
the MENU button to access the Menu, Press
the DOWN button to highlight "OSD Duration"
before I have time
and press ENTER to select this menu item.
to select an item.
Press the RIGHT arrow key to increase the
OSD Duration. Possible values are: 5, 10,
and 30 seconds.
After performing
Check and make sure the Antenna setting
a Autoscan, the
is set correctly in the channel setup menu.
TV did not find
When an antenna is being used, the an-
any TV channels
tenna setting should be set to Air. When a
so the Channel
cable input is being used, the antenna
up and Down
setting should be set to CATV.
buttons do not
function.
The descriptions and characteristics in this owner's manual are for
the purpose of general reference only and not as a guarantee.
In order to provide you with the highest quality product, we may make
changes or modifications without prior notice. The English version
serves as the final reference on all product and operation details should
any discrepancies arise in other languages.
SOLUTION
volume.
off mute.
and the TV.
18
http://www.fineprint.com