Optimus ME-PS2 Guía Rápida página 4

QUICK GUIDE
PC ADAPTER
PC adapter allows the microphone connection to generic audio equipments.
 It has an RJ-45 female connector to connect to the preamplifier input module.
 It incorporates a power Jack socket to be supplied with 24 Vdc 100 mA from an
external power supply. No matter the Jack polarity, the adapter automatically
corrects it.
 Mini-jack stereo audio output (3.5 mm Ø) is included, in which the audio signal picked up by the microphone is available.
Audio output is provided by tip and ring of an unbalanced stereo Jack. The audio connection must be made with shielded cable.
Audio output level is selectable among -60 dBu, -30 dBu and 0 dBu by using the switch of the preamplifier module.
IMPORTANT
- Use the Jack stereo - Jack stereo cable, supplied with the unit, to connect to stereo inputs.
- Use a Jack stereo connector, without connecting the ring, to connect to mono inputs.
- Mono Jacks cannot be used. Output signal would be shorted to ground and there would not be audio output.
SPECIFICATIONS
Frequency Response
SNR
Audio Output
Nominal Output Level
Outputs
Power Supply
Consumtion
LED Indicator
Dimensions
Weight
Accessories
ME-PS2 Version 1.1
200 ~ 16.000 Hz
59 dB
Electronically balanced, 600 Ω
Selectable: −60 dBu ; −30 dBu ; 0 dBu
Audio / control by RJ-45 connector
24 Vdc trought RJ-45 connector
60 mA
Power, blue LED (internal)
125 x 85 x 60 mm
225 g
3.5 mm Jack stereo – Jack stereo cable
24 Vdc 750 mA power source
PC adapter
2/2
ENVIRONMENTAL MICROPHONE