Bahco BCL20IB Guía Rápida página 17

3. Change the blade
1
Remove the cover of the Turn the tool around and
blade driving system. unscrew the centre bolt
lock.
5
Take out and separate Remove the counter
the driving system and blade if it needs to be
the blade. changed.
0.2 Nm
9
Tighten the central nut Tighten the centre bolt
(0.2 Nm). lock.
2 3
Unscrew the centre bolt.
6 7
Clean and grease all
parts including the
pinion.
10 11
Replace the cover and
tighten the upper screw.
4
Remove the centre bolt.
8
Assemble driving system
and blade and fix by
inserting the centre bolt.
12
.
Tighten the lower screw