Parts Identification - AIR SYSTEMS INTERNATIONAL MP-2L Manual De Instrucciones

S
PECIFICATIONS
35 H x 21"W x 15.25" D
Size (Handle Down):
(89cm H x 53cm W x 39.5cm D)
Weight w/o cylinders: 38.5 lbs. (17.25 kg)
Frame:
Steel (Powder coated)
Cylinder Straps: Four (4) adjustable
Whip Assemblies:
5000psi (345 bar) rated 4:1 safety factor
Bleeder Valves Allows depressurization of hand tight nut
Models MP-2H and
MP-4H only
Check Valves:
Allows independent cylinder operation
Low Pressure Whistle: Pneumatic - set at approximately 500psi (34.5 bar)
0-5500psi (379bar) inlet
Regulator:
0-125psi (8.6 bar) discharge
Regulator Flow Rate: 18 cfm maximum
Relief Valve: 125psi (8.6 bar) ASME preset
Two (2) quick connect fittings (1 additional
ordered as an option) Model MP-2L & MP-2H
Four (4) quick connect fittings (1 additional
Air Distribution:
ordered as an option) Model MP-4H
Intrinsically Safe: No electronic devices
-2-
ITEM #
1
2
3
4
5
5A
6
6A
7
8
9
10
11
12
12A
13 BLEEDER VALVE MP-2H AND MP-4H ONLY
14
35 H x 21"W x 15.25" D
S ize (Handle Down): (89cm H x 53cm W x 39.5cm D)
Weight w/o cylinders : 38.5 lbs . (17.25 kg)
Steel (Powder coated)
Frame:
Four (4) adjus table
Cylinder S traps :
5000ps i (345 bar) rated 4:1 s afety factor
Whip As s emblies :
A llows depres s urization of hand tight nut
Bleeder Valves
M odels M P-2H and
M P-4H only
Check Valves : A llows independent cylinder operation
Low Pres s ure Pneumatic - s et at approximately 500ps i (34.5
Whis tle: bar)
Regulator: 0-5500ps i (379bar) inlet
0-125ps i (8.6 bar) dis charge
Regulator Flow Rate: 18 cfm maximum
Relief Valve: 125ps i (8.6 bar) A SM E pres et
Two (2) quick connect fittings (1 additional
ordered as an option) M odel M P-2L & M P-2H
Four (4) quick connect fittings (1 additional
Air Dis tribution: ordered as an option) M odel M P-4H
Intrins ically S afe: No electronic devices
P I
ARTS DENTIFICATION
DESCRIPTION
PULL PIN FOR HANDLE
8" WHEEL
NYLON CYLINDER STRAP
RELIEF VALVE SET @ 125PSI (8.6 bar)
HANSEN RESPIRATOR FITTING
SCHRADER RESPIRATOR FITTING
HANSEN DUST CAP
SCHRADER DUST CAP
REGULATOR OUTLET PRESSURE GAUGE
PRESSURE REGULATOR
CYLINDER PRESSURE GAUGE
LOW PRESSURE WHISTLE
PULL PIN FOR HOSE BRACKET
CGA-346 WRENCH TIGHT NUT/NIPPLE
MODEL MP-2L ONLY
CGA-347 HAND TIGHT NUT/NIPPLE
MP-2H AND MP-4H ONLY
CHECK VALVE MP-2H AND MP-4H ONLY
PART #
HDWR114
HDWR100
HDWR113A
VR125BR
QDH3SL4M
QDSSL4M
QDH3DCAP
QDSDCAP
GA20160B
REG004
GA206KB
AC-PA25
HDWR130
HPBR025/27
SS347HT
VAL030
VC4SMMSS