KLASS Fan MODULO Manual De Instrucciones página 34

VARIATION WITHOUT LIGHT KIT
There is a round fixing plate at the bottom of the motor rotor.
Unscrew the 3 screws from this plate, then supporting the aluminum plate, place
the decorative cover.
Fix it using the three screws as shown below.
Do not completely tighten your screws, turn the plate so that the holes are at the
smallest hole diameter, and tighten the screws.
Now, take the cover carefully, and turn it in the holder clockwise so that it is
screwed into the holder.
Light Fixture
Decorative cover
(without light)
32
Screws
Light
Fixture
Screws