Care And Maintenance - EssickAir BEMIS 338 000 Manual De Cuidado Y Uso Para El Propietario

Caution: Under certain conditions, cold objects in the room, such
as windows and outside walls, may cause moisture to con-
dense. Severe condensation on window sills and walls may
result in water damage. When these conditions exist, a lower
speed setting is recommended. Note: The unit will not shut off
when the water bottles are empty; however, this will not dam-
age the humidifier.

Care and Maintenance

Humidifiers provide comfort by adding moisture to dry, heated, indoor air. To
get the most benefit from the humidifier and avoid product misuse, follow all
instructions carefully, specifically the operation, care and maintenance guide-
lines. Please note this is an electrical appliance and requires careful attention
when in use.
In addition, if you do not follow the recommended care and maintenance
guidelines, microorganisms may be able to grow in the water within the
humidifier's reservoir.
CLEANING THE TRAY AND REPLACING THE (MODEL
#1040) WICKS
CAUTION: Disconnect the power cord before cleaning or servic-
ing the unit.
IMPORTANT: We recommend cleaning your humidifier at least
once a week. Follow instructions.
When carrying your humidifier, it must be kept level to avoid spilling the
water from the tray. ALWAYS carry the unit using the recessed handles on the
bottom of both sides of the tray. Remove and carry water bottles separately
from the tray.
Cleaning your humidifier regularly helps eliminate odors and bacterial and
fungal growth. Ordinary household bleach is a good disinfectant and can be
used in the humidifier tray and bottle after cleaning.
1) Turn off unit and unplug the cord.
2) Remove the water bottles from the humidifier, empty and place them in a
secure location.
3) Locate the two internal spring latches on the bottom center of each side
of the cover. Press inward while lifting up on the cover to release the
latch. Releasing these latches will allow removal of the top housing.
Place the top housing on a flat surface.
4) Remove the air cleaning filters (if provided) from the inlet grilles. See
CLEANING AND REPLACING THE AIR CLEANING FILTER.