Notes On The Laser; Laser Warning Stickers; Specifi Cations Of Laser Source - FujiFilm FP-Z8000 Manual Básico

Safety Precautions

Notes on the Laser

Notes on the Laser
This product uses a laser as a light source, which has the following characteristics:
• The light source may dim under certain conditions.
• The higher the temperature, the more the source will dim.
• The source will grow dimmer the longer it is used.
• The relation between source brightness and length of use can be adjusted using bright-
ness settings.
• To prevent exposure to harmful laser light, consult an authorized service center should
the projector require inspection, adjustment, or repair.
• The projector is equipped with a built-in laser module. Follow the instructions in the
product manual when operating the projector or adjusting settings.
• Be sure to remove the lens cap before turning the projector on. The lens cap could be
damaged if left in place when the projector is turned on and the laser powers up.
• Regardless of their distance from the projector, children should never be allowed to stare
into the beam.
• Before turning the projector on, check to be sure that no one is standing in front of the lens.
• Do not use optical instruments such as telescopes or binoculars while the projector is in
operation.

Laser Warning Stickers

Laser Warning Stickers
Laser warning stickers are affi xed to the bottom and side of the product.
Side
Specifi cations of Laser Source Specifi cations of Laser Source
• Wavelength: 455 nm
• Maximum Output: 74 W
EN-6
Bottom