Thank You For Choosing Sterling
We appreciate your commitment to Sterling value. Please take a few minutes to
review this manual before you start installation. If you encounter any
installation or performance problems, please don't hesitate to contact us. Our
phone numbers are listed on the back cover. Thanks again for choosing Sterling.
Before You Begin
Observe all local plumbing codes.
-
Carefully inspect the new lavatory and pedestal for damage. Inspect the
-
drainage and supply tubing. Replace if necessary.
If possible, assemble the faucet and drain to the lavatory before installing
-
the lavatory.
These instructions are for installing the lavatory to wood frame
-
construction. For other installations, provide suitable bracing and fastening
devices of sufficient size and strength.
The walls and floor must be square, plumb, and level.
-
Lavatory dimensions are nominal and conform to tolerances in
-
ASME/ANSI A112.19.2M standards for vitreous china plumbing fixtures.
Recommended Tools and Materials
1/2" and 9/16"
Combination
Wrenches
Level
B
1010562-2-
Tape
Pencil
Measure
Safety
Glasses
2
Drill with 3/16"
Drill Bit
Common
Woodworking Tools
and Materials
Sterling