Fax +32 2 359 95 50
The invisible protective coating must be removed before you can
•
use the appliance. To do this, set the controls to the maximum
setting and leave switched on for approximately 10 minutes.
Smoke will develop, make sure that the room is ventilated. Switch
off the cooking plates and allow to cool down completely. The
cooking plates are now ready for use.
Always use flat-bottomed saucepans, which make good contact
•
with the cooking plates. The saucepan bases should ideally be of
the same size as the cooking plates.
Select the temperature. The cooking plates have a range of
•
temperatures.
Due to the cooking plates' construction, residual heat will remain
•
after switching off. This may be used to keep food warm for a
short period.
After use, turn temperature dial to "MIN" and unplug the
•
appliance from electrical outlet.
CLEANING AND CARE
Before cleaning, unplug and wait for the appliance to cool
•
down.
Wipe with a moistened cloth.
•
Do not clean with any abrasive scouring pad or steel wool, as this
•
will damage the finish.
Do not immerse in water or any other liquid.
•
Copies of the I/B. Please reproduce them without any
changes
except
under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
4
Assembly page 4/16
special
instruction
from
Team
Print only
USK DKP 21898 - 110127