Placement; Troubleshooting - Steren BAF-1285 Manual De Instrucciones

3. INSTRUCTIONS

3.1 Placement

These speakers have been designed for
placing on the ground, on a table or a speaker
tripod. We remind you that the tripod BAF-150
is compatible with this model.
Avoid placing the device in the corner of a room.
Doing so will increase the low frequencies
output and may cause distortion in the sound.
Avoid placing the speaker in front of walls. This will also increase the output of low frequencies
but not as much as placing the speaker in a corner. However, if you need to emphasize low
frequencies, this is a good way to do so.

4. TROUBLESHOOTING

TROUBLE
• Power connector plugged incorrectly, make sure to insert the power
cord firmly.
Power does • Burnt fuse. Replace with same type, If it continues burning take the
not turn on
unit to the Steren service.
• Check the integrity of the power cord and connectors, replace if is
necessary.
• Fail on preamplifier devices, check the correct performance in your
audio source.
No sound
• Check the integrity of the audio cables and connectors, replace if is
necessary.
Sound • Maybe other components in your system are distorting sound, check
distortion at and set gains on those components.
low levels
• Use separated phases for lighting and sound system.
SOLUTIONS
11 11