4. Repeat all operations for the 2nd half-part.
Installation (Vent outside)
WARNING:
Risk of electric shock! Only use the supplied screws and fi xing devices
to install the extractor hood and follow the instructions in this manual.
Failure to do so may increase the risk of electric shock.
If you have an outlet to the outside, your cooker hood can
be connected as below picture by means of an extraction
duct (enamel, aluminium, fl exible pipe or infl ammable
material with an interior diameter of 150 mm).
1. Before installation, turn the unit off and unplug it from
the outlet.
2. The cooker hood should be placed
at a distance of 65-75 cm above the
cooking plane for best effect.
EN
27