AVM FRITZ!Repeater 600 Operación Y Configuración página 5

If the LED starts fl ashing slowly green again, the connection
was not established. Repeat the connection instructions starting
from step 3.
5. Insert the FRITZ!Repeater into an outlet located about halfway
between the FRITZ!Box and the wireless devices to be added to the
wireless network. The FRITZ!Repeater and your FRITZ!Box connect
once more. As soon as the connection has been established, the
LED lights up. The FRITZ!Repeater 600 is ready for operation.
5
WiFi
LED lights up green
the FRITZ!Repeater has a good
wireless connection and is ready for
operation.
8
WiFi
LED lights up orange
the FRITZ!Repeater has a weak
wireless LAN connection. Plug the
FRITZ!Repeater into an outlet closer to
your FRITZ!Box.
LED fl ashing continuously orange
cannot connect via wireless LAN. Plug
the FRITZ!Repeater into an outlet closer
to your FRITZ!Box.
With the FRITZ!App WLAN you can determine the optimum
position for your FRITZ!Repeater in the home network of your
FRITZ!Box.
9