WARNING!
Flying model aircraft and helicopters outdoors has required mandatory
liability insurance since 2005. Contact your private liability insurer
and make sure that your new and earlier models are included in your
insurance coverage. Request written confirmation and keep this in a
safe place. Alternatively, the DMFV offers a trial membership free of
charge online at www.dmfv.aero, which includes insurance.
8 ChaNgINg The rOTOr BlaDeS
If the rotor blades of the helicopter are damaged and you must
replace them, proceed as follows:
8A Prior to installation, make sure that you do not mix up the rotor
blades. The rotor blades are marked with A and B (see Fig.).
Type A rotor blades are mounted on top and Type B rotor blades
are mounted on the bottom (8B).
8C Rotate the rotor blade approximately 90 degrees further in the
respective direction (top clockwise, bottom anticlockwise).
8D Now carefully pull the rotor blade forwards and off and fit the
new blade in the blade holder until it snaps in place.
Additional tips and tricks can be found online at
www.revell-control.de.
SerVICe NOTeS
Go to www.revell-control.de for ordering
information and tips on replacing spare
parts, plus other useful information on all
Revell Control models.
20
www.revell-control.de
21